A review of recent advances in catalytic combustion of VOCs on perovskite-type catalysts

Along with the rapid development of industry, VOCs gradually move into the spotlight, and now become a kind of harmful environmental pollutants that cannot be overlooked. This paper introduces the hazards of VOCs and the common catalytic combustion catalysts, noble metal catalysts and non-noble metal catalysts, for the elimination of VOCs. Perovskite catalysts, as one of the non-noble catalysts, play an important role in the field of catalytic combustion in recent years. According to the classification of elements doping in perovskites, the research achievements in the past five years were analyzed and reviewed. In addition, this paper also analyzes and elaborates the reaction kinetics and QSAR/QSPR models for the introduction of structural properties and reaction mechanisms.     

Catalytic activity of nanocrystalline ZnM2O4 (M = Fe,Co) prepared via simple and facile synthesis of thermal decomposition of mixed metal complexes of Schiff bases generated from α-ketobutyric acid and diaminoguanidine

Metal complexes ([ML₂], where M = Fe, Co, or Zn; HL = 2-[(6-ethyl-5-oxo-4,5-dihydro-2H-[1,2,4]triazin-3-ylidene)-hydrazono]-butyric acid, C₉H₁₃N₅O₃) of a Schiff base derived from α-ketobutyric acid (α-KBA) and diaminoguanidine (Damgu) were synthesized and characterized using elemental, spectral, and thermal studies. The metal complexes exhibited similar decomposition behavior, with a highly exothermic final decomposition step resulting in the formation of metal oxides. Isomorphism among the complexes was revealed using a powder X-ray diffraction (PXRD) technique. Solid solution precursors ([Zn_1/3M_2/3(L)₂], where M = Fe, Co) were synthesized and characterized using various physico-chemical techniques. A thermal decomposition technique was used to prepare spinel-type zinc cobaltite (ZnCo₂O₄) and zinc ferrite (ZnFe₂O₄) nanocrystalline particles with the synthesized single source precursors. Structural studies using PXRD ascertained the predominant crystal phase to be spinel. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) showed a mean nanoparticle size of 18 ± 2 nm. Magnetic measurements revealed a weak magnetic behavior in the synthesized spinels. In the aqueous phase, the spinels exhibited catalytic activity, reducing 4-nitrophenol (4-NP) in the presence of NaBH₄ at room temperature. Additionally, the study demonstrated that the catalyst can be recovered and reused for five cycles with a more than 85% conversion efficiency.     

Insight into room-temperature catalytic oxidation of NO by CrO2(110): A DFT study

The first-principles DFT calculations together with microkinetic analysis reveal the complex catalytic mechanism of low-content NO oxidation on CrO₂(110) at room temperature. It quantitatively makes clear that CrO₂(110) can exhibit considerable activity with the Mars-van-Krevelen mechanism preferred, and the nitrate species serves as the key poisoning species.     

Sonication-Assisted Synthesis of Bimetallic Hg/Pd Alloy Nanoparticles for Catalytic Reduction of Nitrophenol and its Derivatives

In this article, we report a facile approach for the synthesis of an inexpensive catalyst of bimetallic Hg/Pd alloys comprising nanoparticles with various structures using a unique ultrasonic reaction that is conducted without the use of any reducing agent. The nanoparticles of Hg/Pd alloys (HgPd and Hg₂Pd₅) were achieved for the first time by sonicating an aqueous solution of Palladium (II) nitrate with metallic liquid mercury, as evidenced by XRD. EDS further confirmed the presence of Pd and Hg elements in the alloy. The surface morphology and structure of the nanoparticles have been systematically investigated by HRSEM, HRTEM and SAED pattern. In order to explore the catalytic activity of the as-synthesized nanoalloys, the catalytic reduction of 4-nitrophenol and a few other nitrophenol derivatives were investigated. Excellent catalytic activity was obtained for Hg/Pd (1:1) alloy, and the rate constant for the reduction of 4-NP with Hg/Pd at room temperature was found to be 58.4 × 10⁻³ s⁻¹, which is possibly the highest ever reported. The catalyst exhibited superior stability and reusability when compared with those reported in the literature for other catalysts based on noble metals.     

Prospects for the combination of mechanochemistry and flow applied to catalytic transformations

The urge of developing modern alternatives regarding industrial production has led to the creation of novel techniques that help overcome critical disadvantages from traditional batch mechanochemistry. One promising strategy includes the merging of flow processes with mechanochemistry. Two technologies are herein highlighted: twin-screw extrusion (TSE) and Impact (induction) in Continuous flow HEated Mechanochemistry (I-CHEM) allowing not only the industrial production of polymers but also active pharmaceutical ingredients, synthesis of (nano)materials, and the obtention of high-added value products from biomass and wastes valorization.     

Characterizing the protonation states of the catalytic residues in apo and substrate-bound human T-cell leukemia virus type 1 protease

Human T-cell leukemia virus type 1 (HTLV-1) protease is an attractive target when developing inhibitors to treat HTLV-1 associated diseases. To study the catalytic mechanism and design novel HTLV-1 protease inhibitors, the protonation states of the two catalytic aspartic acid residues must be determined. Free energy simulations have been conducted to study the proton transfer reaction between the catalytic residues of HTLV-1 protease using a combined quantum mechanical and molecular mechanical (QM/MM) molecular dynamics simulation. The free energy profiles for the reaction in the apo-enzyme and in an enzyme – substrate complex have been obtained. In the apo-enzyme, the two catalytic residues are chemically equivalent and are expected to be both unprotonated. Upon substrate binding, the catalytic residues of HTLV-1 protease evolve to a singly protonated state, in which the OD1 of Asp32 is protonated and forms a hydrogen bond with the OD1 of Asp32′, which is unprotonated. The HTLV-1 protease–substrate complex structure obtained from this simulation can serve as the Michaelis complex structure for further mechanistic studies of HTLV-1 protease while providing a receptor structure with the correct protonation states for the active site residues toward the design of novel HTLV-1 protease inhibitors through virtual screening.     

Molybdenum-catalyzed reduction of molecular dinitrogen into ammonia under ambient reaction conditions

Synthesis of transition metal–dinitrogen complexes and stoichiometric transformations of their coordinated dinitrogen into ammonia and hydrazine have so far been well investigated in order to achieve a novel nitrogen fixation under ambient conditions. As an extension of our study, the dimolybdenum–dinitrogen complex bearing PNP pincer ligands has been found to work as an effective catalyst for the formation of ammonia from dinitrogen, where 52 equiv of ammonia are produced based on the catalyst (26 equiv of ammonia are produced based on the molybdenum atom of the catalyst). This is the most effective catalytic reaction system for the formation of ammonia from molecular dinitrogen catalyzed by transition metal–dinitrogen complexes as catalysts under ambient reaction conditions. Herein, we describe recent results concerning the catalytic reaction, including the proposed reaction pathway.     

IM-5分子筛在Ni-Cu催化剂甲烷热裂解制氢反应中的作用研究

甲烷热裂解制氢并生成高附加值的纳米碳材料,被认为是极具发展前景的氢气生产途径,但高性能催化剂的研发仍存在诸多挑战.我们选择多种载体(TS-1、 IM-5、 Y、介孔SiO₂、 γ-Al₂O₃、 CNTs),采用浸渍法制备Ni-Cu负载催化剂,通过低温N2吸附-脱附、 XRD、 SEM和H₂-TPR等系列表征方法对样品进行分析,考察不同载体对催化剂甲烷裂解制氢和纳米碳材料的影响.实验结果发现,分子筛载体独特的孔道结构有利于金属颗粒的分散,能有效避免反应中界面效应导致的催化剂失活,可提高催化剂反应活性并延长反应寿命,也显著提高了其碳产率.其中以IM-5分子筛为载体的催化剂表现最佳,在反应温度为700℃时, NiCu/IM-5催化剂甲烷转化率高达80%,氢气选择性达100%,反应400 min后活性未见明显降低. NiCu/IM-5催化剂碳产率高达1 446 g_C/g_cat,是NiCu/SiO₂催化剂的5.7倍, NiCu/γ-Al     

钾改性氧化铝基羰基硫水解催化剂及其失活机理

天然气、油田伴生气、高炉煤气等化工生产过程中伴生COS气体,不仅会腐蚀管道和毒害催化剂,还会严重污染环境并危害人类健康。COS催化水解反应可在温和条件下高效的将COS脱除,是最具应用前景的COS脱除技术之一。碱金属元素因其具有独特的电子供体性质、表面碱性和静电吸附等特性,常被用作助催化剂以提高Al₂O₃的COS催化水解性能。近年来,以钾为助剂改性的Al₂O₃催化剂(K₂CO₃/Al₂O₃)在COS催化水解反应中得到广泛的应用,但由于负载在Al₂O₃上的K物种的组成复杂,目前研究者对K₂CO₃/Al₂O₃催化剂上COS水解机理的理解仍存在一定的困惑和争议。本论文通过湿法浸渍法合成出一系列钾盐和钠盐改性的Al₂O₃催化剂,并利用各类先进的表征技术对这些催化剂进行分析。活性测试表明,以K₂CO₃、K₂C₂O₄、NaHCO₃、Na₂CO₃和NaC₂O₄改性Al₂O₃催化剂均有助于COS的水解。其中K₂CO₃/Al₂O₃拥有最佳的COS水解性能,连续运行20 h后其COS转化率仍高于~93%,远远优于未改性的Al₂O₃ (~58%)。我们利用原位红外光谱和X射线光电子能谱探明了反应过程中催化剂的化学结构特征,阐明了H₂O分子在K₂CO₃/Al₂O₃上的水解作用机制。原位红外表明COS在K₂CO₃/Al₂O₃上的水解过程中形成了硫代碳酸氢盐中间产物。X射线光电子能谱表征证明催化剂的失活主要是因为催化剂表面积累了硫酸盐和单质硫。此外,我们还研究了水蒸气含量对COS水解性能的影响,研究发现,由于H₂O和COS分子在催化剂表面存在竞争吸附,过量的H₂O会引起催化活性的下降。上述研究表明,K₂CO₃/Al₂O₃催化剂上COS水解性能的提高主要是形成了HO-Al-O-K界面活性位。更为重要的是,所制备的催化剂都是在模拟工业工况条件下进行的,这为后续的工业应用提供了宝贵理论指导。本工作为理解助剂钾在Al₂O₃催化剂上COS水解活性的增强提供了新的见解,这为未来设计稳定高效的COS水解催化剂打开了新的发展方向。     

A Tailored Versatile and Efficient NHC-Based NNC-Pincer Manganese Catalyst for Hydrogenation of Polar Unsaturated Compounds

The reactivity of metal-hydride complexes can be harnessed by the modification of ancillary ligands. With the aim of improving the hydride-donor ability of the key Mn−H intermediate and reducing steric hindrance, we herein report the rational design of a versatile and efficient NHC-based NNC-pincer Mn catalyst for hydrogenation reactions. This newly developed catalyst exhibited higher activity than the corresponding NNP-pincer Mn catalyst owing to its reduced steric hindrance and enhanced Mn−H σ-bonding orbital energy level through a π-antibonding interaction. Using this highly active NNC-pincer Mn catalyst, a rich array of polar unsaturated compounds (>80 examples) including esters, N-heteroarenes, amides, carbonates, and urea derivatives, were successfully hydrogenated under relatively mild conditions. This work represents a rare example of a general phosphine-free Mn-catalyzed hydrogenation system.